|
Post by propmaster2000 on Dec 16, 2016 19:36:15 GMT
Not too long ago I started to get more involved with servo drive motors and found that the Hocus Pocus Spellbook Eye would be a good challenge. I wanted to keep the whole mech. low profile to fit a 2" thick book and fairly close to the outside edge. I came up with a way that works for me and I had not seen it done this way before (internet search). I am only doing a 2 axis movement for the eye. No eyelid movement.
Here is a video link to my progress:
Thanks for looking.
.
|
|
|
Post by Honus on Dec 22, 2016 19:52:14 GMT
That's really cool!
|
|
|
Post by propmaster2000 on Dec 29, 2016 15:32:46 GMT
Thanks
|
|